亚洲专区欧美,一级黄色网,国产精品视频第一区二区三区

Radel? R-5100

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: Radel PPSU
Product No: Radel R-5100
Product Quantity: 25KG / BAG
Product Features: Acid Resistant，Autoclave Sterilizable，Base Resistant，Biocompatible，Chemical Resistant，E-beam Sterilizable，Ethylene Oxide Sterilizable，Flame Retardant，Good Sterilizability，Good Thermal Stability，Heat Sterilizable，High ESCR (Stress Crack Resist.)，High Heat Resistance，Hydrolytically Stable，Radiation (Gamma) Resistant，Radiation Sterilizable，Radiotranslucent，Steam Resistant，Steam Sterilizable，Ultra High Toughness，General Purpose

Product information

Radel? R-5100

Polyphenylsulfone

Solvay Specialty Polymers

Product Description:

Radel? R-5100 is an opaque, general purpose polyphenylsulfone (PPSU) for injection molding, that offers exceptional hydrolytic stability, and toughness superior to other commercially-available, high-temperature engineering resins. This resin also offers a high deflection temperature and outstanding resistance to environmental stress cracking. Radel? polymers are inherently flame retardant, provide excellent thermal stability and possess good electrical properties.

Black: Radel? R-5100 BK937

Bone: Radel? R-5100 NT15

Grey: Radel? R-5100 GY1137

Grey: Radel? R-5100 GY1037

Grey: Radel? R-5100 GY874

Red: Radel? R-5100 RD1018

Orange: Radel? R-5100 OR1145

Yellow: Radel? R-5100 YL1337

Green: Radel? R-5100 GN1007

Blue: Radel? R-5100 BU1027

Violet: Radel? R-5100 VT2582

Brown: Radel? R-5100 BN1164

Filler / Reinforcement	Filler
Features	Acid Resistant，Autoclave Sterilizable，Base Resistant，Biocompatible，Chemical Resistant，E-beam Sterilizable，Ethylene Oxide Sterilizable，F(xiàn)lame Retardant，General Purpose，Good Sterilizability，Good Thermal Stability，Heat Sterilizable，High ESCR (Stress Crack Resist.)High Heat Resistance，Hydrolytically Stable，Radiation (Gamma) Resistant，Radiation Sterilizable，Radiotranslucent，Steam Resistant，Steam Sterilizable，Ultra High Toughness
Uses	Aerospace Applications，Aircraft Applications，Connectors，Dental Applications，F(xiàn)ood Service Applications，Hospital Goods，Medical Devices，Medical/Healthcare Applications，Plumbing Parts，Surgical Instruments
Agency Ratings	FAA FAR 25.853aISO 10993 3NSF STD-51 4NSF STD-61 5
RoHS Compliance	RoHS Compliant
Appearance	Black，Colors Available，Light Beige，Opaque
Forms	Pellets
Processing Method	Blow Molding，Extrusion，F(xiàn)ilm Extrusion，Injection Molding，Machining，Profile Extrusion，Sheet Extrusion，Thermoforming
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.30		ASTM D792
Melt Mass-Flow Rate (MFR)	14 to 20	g/10 min	ASTM D1238
Molding Shrinkage - Flow	7.0E-3	in/in	ASTM D955
Water Absorption (24 hr)	0.37	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	340000	psi	ASTM D638
Tensile Strength			ASTM D638
Yield	10100	psi
Break	10100	psi
Tensile Elongation			ASTM D638
Yield	7.2	%
Break	60	%
Flexural Modulus	350000	psi	ASTM D790
Flexural Strength (Yield)	13200	psi	ASTM D790
Compressive Modulus	251000	psi	ASTM D695
Compressive Strength	14400	psi	ASTM D695
Shear Strength	9100	psi	ASTM D732
Poisson's Ratio	0.42		ASTM E132
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	13	ft·lb/in	ASTM D256
Unnotched Izod Impact	No Break		ASTM D256
Tensile Impact Strength	190	ft·lb/in2	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed	417	°F
264 psi, Unannealed	405	°F
Glass Transition Temperature	428	°F	ASTM E1356
CLTE - Flow	3.1E-5	in/in/°F	ASTM D696
Thermal Conductivity	2.4	Btu·in/hr/ft2/°F	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	9.0E+15	ohms·cm	ASTM D257
Dielectric Strength	360	V/mil	ASTM D149
Dielectric Constant			ASTM D150
60 Hz	3.44
1 kHz	3.40
Flammability	Nominal Value	Unit	Test Method
Flame Rating 6 (0.030 in, ALL colors, UL file E36098)	V-0		UL 94
Oxygen Index	38	%	ASTM D2863

Optical	Nominal Value		Test Method
Refractive Index	1.672		ASTM D542

Injection	Nominal Value	Unit
Drying Temperature	300	°F
Drying Time	2.5	hr
Suggested Max Moisture	0.050	%
Rear Temperature	610	°F
Middle Temperature	660	°F
Front Temperature	660	°F
Processing (Melt) Temp	650 to 730	°F
Mold Temperature	280 to 325	°F
Back Pressure	50.0 to 100	psi
Screw Compression Ratio	2.2:1.0

^{<optgroup id="5m76h"></optgroup>}

亚洲aaaaaaaaa I 26uuu 在线都市激情 I 506070老熟妇 I 午夜0851网站 I 伊人青青网 I avwwwwwwwww I 欧美黄色A V I AV大片在线 I 日韩手机Aa I 91无套内射 I 美女任你操 I 91在线地址

Products

Products

Radel? R-5100

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service