Radilon? D 40EP25ZW 7037 BLU 6556
Polyamide 610
PA610 flexible, high viscosity extrusion grade. Toughened and plasticized. Heat stabilized. Blue colour.
Suitable for extrusion of pipes, profiles and cable jackets. Good impact resistance also at low temperatures.
This grade is partially renewably-sourced (60% of base polymer by weight).
Additive | - Heat Stabilizer，Plasticizer
|
Features | |
Uses | - Jacketing，Piping，Profiles，Wire & Cable Applications
|
RoHS Compliance | |
Appearance | |
Processing Method | - Extrusion，Pipe Extrusion，Profile Extrusion
|
Resin ID (ISO 1043) | |
Density | 1.04 | -- | g/cm3 | ISO 1183 |
Water Absorption |
|
|
| ISO 62 |
Saturation, 73°F, 0.0787 in | 2.0 | -- | % |
|
Equilibrium, 73°F, 0.0787 in, 50% RH | 0.90 | -- | % |
|
Tensile Modulus | 74000 | 50800 | psi | ISO 527-2/1A/1 |
Tensile Stress |
|
|
|
|
Break | 5220 | 4790 | psi | ISO 527-2/1A/5 |
100% Strain | 4060 | 3340 | psi | ISO 527-2/1A/50 |
Nominal Tensile Strain at Break | 300 | 330 | % | ISO 527-2/1A/50 |
Flexural Modulus 2 | 65300 | 43500 | psi | ISO 178 |
Flexural Stress 2 | 2470 | 1890 | psi | ISO 178 |
Charpy Notched Impact Strength |
|
|
| ISO 179/1eA |
-22°F | 26 | -- | ft·lb/in2 |
|
73°F | 45 | 52 | ft·lb/in2 |
|
Heat Deflection Temperature |
|
|
|
|
66 psi, Unannealed | 212 | -- | °F | ISO 75-2/Bf |
264 psi, Unannealed | 122 | -- | °F | ISO 75-2/Af |
Melting Temperature 3 | 419 | -- | °F | ISO 11357-3 |
Surface Resistivity 4 | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
Volume Resistivity 4 | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
Drying Temperature - Desiccant Dryer | 176 | °F |
|
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr |
|
Dew Point - Desiccant Dryer | -4 | °F |
|
Suggested Max Moisture | 0.10 | % |
|
Processing (Melt) Temp | 446 to 500 | °F |
|
Mold Temperature | 158 to 176 | °F |
|
Injection Rate | Moderate |
|
|
Melt Temperature | 446 to 482 | °F |
|
