Radilon? A 24EPT3010UK 333 NER
Polyamide 66
PA66 low viscosity injection moulding grade. Toughened and plasticized. Improved UV resistance. Natural colour.
Suitable for parts requiring high productivity like fasteners, connectors, cable ties.
ISO 1043 : PA66-HITP
Features | - Good Toughness。Low Viscosity。Plasticized。UV Resistant
|
Uses | - Connectors，F(xiàn)asteners，Wire & Cable Applications
|
RoHS Compliance | |
Appearance | |
Processing Method | - Extrusion，Injection Molding
|
Resin ID (ISO 1043) | |
Density | 1.09 | -- | g/cm3 | ISO 1183 |
Tensile Modulus | 167000 | -- | psi | ISO 527-2/1A/1 |
Tensile Stress (Yield) | 5800 | -- | psi | ISO 527-2/1A/50 |
Tensile Strain (Yield) | 25 | -- | % | ISO 527-2/1A/50 |
Nominal Tensile Strain at Break | > 100 | -- | % | ISO 527-2/1A/50 |
Flexural Modulus 2 | 138000 | -- | psi | ISO 178 |
Flexural Stress 2 | 4790 | -- | psi | ISO 178 |
Charpy Notched Impact Strength(73°F) | 38 | -- | ft·lb/in2 | ISO 179/1eA |
Heat Deflection Temperature (264 psi, Unannealed) | 122 | -- | °F | ISO 75-2/Af |
Vicat Softening Temperature | 248 | -- | °F | ISO 306/B50 |
Melting Temperature 3 | 491 | -- | °F | ISO 11357 |
Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
Burning Rate | < 1.2 | -- | in/min | FMVSS 302 |
Flame Rating (0.031 in) | HB | -- |
| UL 94 |
Drying Temperature - Desiccant Dryer | 176 | °F |
|
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr |
|
Dew Point - Desiccant Dryer | < -4 | °F |
|
Suggested Max Moisture | 0.15 | % |
|
Processing (Melt) Temp | 518 to 554 | °F |
|
Mold Temperature | 158 to 194 | °F |
|
Injection Rate | Moderate |
|
|
Drying Temperature | 176 | °F |
|
Drying Time | 2.0 to 4.0 | hr |
|
Suggested Max Moisture | 0.15 | % |
|
Melt Temperature | 518 to 554 | °F |
|
