亚洲另类欧美日韩,先锋影音自拍偷拍,成人永久在线

Radilon? S 38F 100 NAT

Manufacturer: RADICI
Produced At: Europe / China
Product Category: Polyamide 6 (Nylon 6)
Product No: Radilon S 38F 100 NAT
Product Quantity: 25KG / BAG
Product Features: High Viscosity

Product information

Radilon? S 38F 100 NAT

Polyamide 6

Radici Plastics

Product Description:

PA6 high viscosity extrusion grade. Natural colour.

Suitable for extrusion of cast and blown films, and monofilaments.

ISO 1043 : PA6

Features	High Viscosity
Uses	Blown Film，Cast Film，Monofilaments
RoHS Compliance	RoHS Compliant
Appearance	Natural Color
Processing Method	Extrusion，Injection Molding
Resin ID (ISO 1043)	PA6

Physical	Dry	Conditioned	Unit	Test Method
Density	1.14	--	g/cm3	ISO 1183
Water Absorption				ISO 62
Saturation, 73°F, 0.0787 in	11	--	%
Equilibrium, 73°F, 0.0787 in, 50% RH	3.1	--	%
Viscosity Number (H2SO4 (Sulphuric Acid))	240	--	cm3/g	ISO 307

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	421000	160000	psi	ISO 527-2/1A/1
Tensile Stress (Yield)	10900	5800	psi	ISO 527-2/1A/50
Tensile Strain (Yield)	4.0	30	%	ISO 527-2/1A/50
Nominal Tensile Strain at Break	90	> 100	%	ISO 527-2/1A/50
Flexural Modulus 2	363000	109000	psi	ISO 178
Flexural Stress 2	13800	4350	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	2.4	--	ft·lb/in2
73°F	3.8	9.5	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	338	--	°F	ISO 75-2/Bf
264 psi, Unannealed	140	--	°F	ISO 75-2/Af
Vicat Softening Temperature	392	--	°F	ISO 306/B50
Melting Temperature 3	428	--	°F	ISO 11357

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	1.0E+12	1.0E+10	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+13	ohms·cm	IEC 60093
Comparative Tracking Index	600	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Burning Rate	0.0	--	in/min	FMVSS 302
Flame Rating (0.031 in)	HB	--		UL 94
Glow Wire Flammability Index				IEC 60695-2-12
0.04 in	1560	--	°F
0.08 in	1520	--	°F
Glow Wire Ignition Temperature				IEC 60695-2-13
0.04 in	1610	--	°F
0.08 in	1290	--	°F

Injection	Dry	Unit
Drying Temperature - Desiccant Dryer	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Dew Point - Desiccant Dryer	< -4	°F
Suggested Max Moisture	0.15	%
Processing (Melt) Temp	482 to 536	°F
Mold Temperature	158 to 176	°F
Injection Rate	Moderate
Extrusion	Dry	Unit
Drying Temperature	176	°F
Drying Time	2.0 to 4.0	hr
Suggested Max Moisture	0.15	%
Melt Temperature	464 to 518	°F

Products

Products

Radilon? S 38F 100 NAT

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service