日韩毛片免费观看,伊人网视频,中文字幕不卡一区

Rynite? FR515 NC010

Manufacturer: Celanese
Produced At: Import/ China
Product Category: PET
Product No: Rynite? FR515 NC010
Product Quantity: 25KG / BAG
Product Features: Flame Retardant

Product information

Rynite? FR515 NC010

THERMOPLASTIC POLYESTER RESIN

Product Description:

15% Glass Reinforced, Flame Retardant, Polyethylene Terephthalate

Filler / Reinforcement	Glass Fiber, 15% Filler by Weight
Additive	Flame Retardant,Mold Release
Features	Flame Retardant
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature, Dynamic (ISO 11403-1) Shear Stress vs. Shear Rate (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)	PET-GF15FR(17)
Resin ID (ISO 1043)	PET-GF15FR(17)

Physical	Nominal Value	Unit	Test Method
Density	1.53	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR) (280°C/2.16 kg)	0.366	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	0.80	%
Across Flow 3	1.2	%
Flow	0.30	%
Flow 3	0.50	%
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness			ISO 2039-2
M-Scale	88
R-Scale	120

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	986000	psi	ISO 527-2
Tensile Stress (Break)	15500	psi	ISO 527-2
Tensile Strain (Break)	2.6	%	ISO 527-2
Flexural Modulus	862000	psi	ISO 178
Flexural Stress	24700	psi	ISO 178
Poisson's Ratio	0.35		ISO 527
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-40°F	3.3	ft·lb/in2
-22°F	3.3	ft·lb/in2
73°F	3.8	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-40°F	9.5	ft·lb/in2
-22°F	17	ft·lb/in2
73°F	19	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	464	°F	ISO 75-2/B
264 psi, Unannealed	392	°F	ISO 75-2/A
Vicat Softening Temperature	410	°F	ISO 306/B50
Melting Temperature 4	489	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	1.0E-5	in/in/°F
Flow : -40 to 73°F	1.8E-5	in/in/°F
Flow : 131 to 320°F	6.7E-6	in/in/°F
Transverse	4.9E-5	in/in/°F
Transverse : -40 to 73°F	3.9E-5	in/in/°F
Transverse : 131 to 320°F	5.8E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+13	ohms	IEC 60093
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength	860	V/mil	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	3.80
1 MHz	3.50
Dissipation Factor			IEC 60250
100 Hz	9.0E-3
1 MHz	0.015
Comparative Tracking Index (CTI)	PLC 3		UL 746
Comparative Tracking Index	200	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Burning Rate 5 (0.0394 in)	< 3.9	in/min	ISO 3795
Flame Rating			UL 94, IEC 60695-11-10, -20
0.03 in	V-0
0.06 in	5VA
Oxygen Index	32	%	ISO 4589-2
FMVSS Flammability	B		FMVSS 302

Fill Analysis	Nominal Value	Unit
Ejection Temperature	338	°F

Injection	Nominal Value	Unit
Drying Temperature	248	°F
Drying Time - Desiccant Dryer	4.0 to 6.0	hr
Suggested Max Moisture	0.020	%
Processing (Melt) Temp	518 to 554	°F
Melt Temperature, Optimum	536	°F
Mold Temperature	212 to 248	°F
Mold Temperature, Optimum	230	°F
Holding Pressure	11600	psi
Back Pressure	As low as possible
Drying Recommended	yes
Hold Pressure Time	4.00	s/mm
Maximum Screw Tangential Speed	472	in/min

Products

Products

Rynite? FR515 NC010

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service