亚洲精品国偷自产在线,中文字幕精品一区二区2021年,亚洲一区成人在线

Rynite? FR530 BK507

Manufacturer: Celanese
Produced At: Import/ China
Product Category: PET
Product No: Rynite? FR530 BK507
Product Quantity: 25KG / BAG
Product Features: Flame Retardant

Product information

Rynite? FR530 BK507

THERMOPLASTIC POLYESTER RESIN

Product Description:

30% Glass Reinforced, Flame Retardant, Polyethylene Terephthalate

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Additive	Flame Retardant
Features	Flame Retardant
RoHS Compliance	Contact Manufacturer
Processing Method	Injection Molding
Part Marking Code (ISO 11469)	PET-GF30FR(17)
Resin ID (ISO 1043)	PET-GF30FR(17)

Physical	Nominal Value	Unit	Test Method
Density	1.68	g/cm3	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	0.80	%
Flow	0.20	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1.64E+6	psi	ISO 527-2
Tensile Stress (Break)	18900	psi	ISO 527-2
Tensile Strain (Break)	1.9	%	ISO 527-2
Flexural Modulus	1.52E+6	psi	ISO 178
Flexural Stress	29000	psi	ISO 178
Poisson's Ratio	0.33		ISO 527
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-40°F	3.8	ft·lb/in2
73°F	4.3	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-40°F	14	ft·lb/in2
73°F	19	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	469	°F	ISO 75-2/B
264 psi, Unannealed	428	°F	ISO 75-2/A
Melting Temperature 3	486	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	1.2E-5	in/in/°F
Flow : -40 to 73°F	1.1E-5	in/in/°F
Flow : 131 to 320°F	9.4E-6	in/in/°F
Transverse	5.3E-5	in/in/°F
Transverse : -40 to 73°F	3.8E-5	in/in/°F
Transverse : 131 to 320°F	6.9E-5	in/in/°F
RTI Elec			UL 746
0.016 in	311	°F
0.030 in	311	°F
0.06 in	311	°F
0.12 in	311	°F
RTI Imp			UL 746
0.016 in	311	°F
0.030 in	311	°F
0.06 in	311	°F
0.12 in	311	°F
RTI Str			UL 746
0.016 in	311	°F
0.030 in	311	°F
0.06 in	311	°F
0.12 in	311	°F

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+14	ohms	IEC 60093
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Relative Permittivity			IEC 60250
100 Hz	4.10
1 MHz	3.70
Dissipation Factor			IEC 60250
100 Hz	0.031
1 MHz	0.013
Comparative Tracking Index (CTI)	PLC 2		UL 746
Comparative Tracking Index	200	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94, IEC 60695-11-10, -20
0.014 in	V-0
0.06 in	V-0 5VA
Oxygen Index	33	%	ISO 4589-2
FMVSS Flammability	DNI		FMVSS 302

Fill Analysis	Nominal Value	Unit
Ejection Temperature	338	°F

Injection	Nominal Value	Unit
Drying Temperature	248	°F
Drying Time - Desiccant Dryer	4.0 to 6.0	hr
Suggested Max Moisture	0.020	%
Processing (Melt) Temp	518 to 554	°F
Melt Temperature, Optimum	536	°F
Mold Temperature	212 to 248	°F
Mold Temperature, Optimum	230	°F
Holding Pressure	11600	psi
Back Pressure	As low as possible
Drying Recommended	yes
Hold Pressure Time	4.00	s/mm
Maximum Screw Tangential Speed	472	in/min

Products

Products

Rynite? FR530 BK507

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service