日本天堂网,影音先锋中文字幕电影,日日草日日干

RTP EMI 2162

Manufacturer: RTP Company
Produced At: Import / China
Product Category: Polyether Imide（PEI）
Product No: RTP EMI 2162
Product Quantity: 25KG / BAG
Product Features: Electrically Conductive，Electromagnetic Shielding (EMI)，ESD Protection，Radio Frequency Shielding (RFI)

Product information

RTP EMI 2162

Polyether Imide

RTP Company

Product Description:

Stainless Steel Fiber - Electrically Conductive - EMI/RFI/ESD Protection

Filler / Reinforcement	Stainless Steel Fiber, 15% Filler by Weight
Features	Electrically Conductive，Electromagnetic Shielding (EMI)， ESD Protection，Radio Frequency Shielding (RFI)
RoHS Compliance	Contact Manufacturer
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.42		ASTM D792
Molding Shrinkage - Flow (0.126 in)	5.0E-3 to 8.0E-3	in/in	ASTM D955
Moisture Content	0.040	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	570000	psi	ASTM D638
Tensile Strength	16500	psi	ASTM D638
Tensile Elongation (Yield)	4.0 to 6.0	%	ASTM D638
Flexural Modulus	700000	psi	ASTM D790
Flexural Strength	28000	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (0.126 in)	0.80	ft·lb/in	ASTM D256
Unnotched Izod Impact (0.126 in)	8.2	ft·lb/in	ASTM D4812

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	390	°F	ASTM D648

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity
--	< 1.0E+5	ohms	ESD STM11.11
--	< 1.0E+6	ohms	ASTM D257
Volume Resistivity	< 0.0	ohms·cm	ASTM D257
Static Decay 1	< 2.0	sec	FTMS 101C 4046.1
Flammability	Nominal Value	Unit	Test Method
Flame Rating (0.06 in, ** Values per RTP Company testing.)	V-0		UL 94

Additional Information	Nominal Value	Unit
Primary Additive	15	%

Injection	Nominal Value	Unit
Drying Temperature	300	°F
Drying Time	4.0	hr
Dew Point	-20	°F
Processing (Melt) Temp	670 to 750	°F
Mold Temperature	275 to 350	°F
Injection Pressure	12000 to 18000	psi
Injection Notes
Use a reverse barrel profile. Remove hopper magnets. Allow 4 - 5 shots to properly disperse the conductive fibers. The surface finish should have a silver streaking appearance, not clumps. Remove hopper magnets. Desiccant Type Dryer Required.

Notes

1MIL-PRF-81705D, 5kV to 50 V, 12% RH

亚洲aaaaaaaaa I 26uuu 在线都市激情 I 506070老熟妇 I 午夜0851网站 I 伊人青青网 I avwwwwwwwww I 欧美黄色A V I AV大片在线 I 日韩手机Aa I 91无套内射 I 美女任你操 I 91在线地址

Products

Products

RTP EMI 2162

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service