中文字幕丝袜,日韩福利影院,亚洲永久视频

Texin? 1210

Manufacturer: Covestro
Produced At: Europe / China
Product Category: TPU
Product No: Texin 1210
Product Quantity: 25KG / BAG
Product Features: Abrasion Resistant，Chemical Resistant，Food Contact Acceptable，Low Gel，Medium Clarity，Oil Resistant，Solvent Resistant

Product information

Texin? 1210

Thermoplastic Polyurethane Elastomer (Polyester)

Covestro - PUR

Product Description:

Texin 1210 resin is an aromatic polyester-based thermoplastic polyurethane with a Shore hardness of approximately 92A.

Features	Abrasion Resistant，Chemical Resistant，Food Contact Acceptable，Low Gel， Medium Clarity，Oil Resistant，Solvent Resistant
Uses	Cable Jacketing，Film，Footwear，Hose，Profiles，Sheet，Tubing
Agency Ratings	FDA 21 CFR 177.1680，FDA 21 CFR 177.2600
Appearance	Natural Color
Processing Method	Extrusion，Injection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity
--	1.22		ASTM D792
--	1.22	g/cm3	ISO 1183
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	92		ASTM D2240, ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus			ASTM D790, ISO 178
73°F	10600	psi
158°F	4600	psi
Taber Abrasion Resistance
1000 Cycles, 1000 g, H-18 Wheel	27.0	mg	ASTM D1044
1000 Cycles, 1000 g, H-18 Wheel	27.0	mg	ISO 4649
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412, ISO 37
100% Strain	1410	psi
300% Strain	2900	psi
Tensile Strength (Yield)	5800	psi	ASTM D412, ISO 37
Tensile Elongation (Break)	510	%	ASTM D412, ISO 37
Tear Strength
-- 2	737	lbf/in	ASTM D624
--	740	lbf/in	ISO 34-1
Compression Set 3			ASTM D395B, ISO 815
73°F, 22 hr	16	%
158°F, 22 hr	43	%

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	6.80	°F	DMA
Vicat Softening Temperature	190	°F	ISO 306/50, ASTM D1525 4

Injection	Nominal Value	Unit
Drying Temperature - Desiccant Dryer	178 to 219	°F
Drying Time - Desiccant Dryer	2.0	hr
Suggested Max Moisture	< 0.030	%
Suggested Max Regrind	20	%
Rear Temperature	360 to 385	°F
Middle Temperature	370 to 399	°F
Front Temperature	379 to 405	°F
Nozzle Temperature	385 to 410	°F
Processing (Melt) Temp	376 to 399	°F
Mold Temperature	61 to 100	°F
Injection Pressure	6000 to 15000	psi
Injection Rate	Moderate
Back Pressure	< 800	psi
Screw Speed	40 to 80	rpm
Cushion	< 0.125	in
Injection Notes
Hold Pressure: 60 to 80% of Injection Pressure
Extrusion	Nominal Value	Unit
Drying Temperature	178 to 219	°F
Drying Time	2.0	hr
Suggested Max Regrind	20	%
Cylinder Zone 1 Temp.	360 to 390	°F
Cylinder Zone 2 Temp.	360 to 399	°F
Cylinder Zone 3 Temp.	360 to 399	°F
Melt Temperature	376 to 399	°F
Die Temperature	370 to 399	°F

Products

Products

Texin? 1210

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service