超碰97自拍,中文字幕久久久久久久,爱啪啪影视

Arnite? AV2 340 XL

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyethylene Terephthalate（PET）
Product No: Arnite AV2 340 XL
Product Quantity: 25KG / BAG
Product Features: Low to No Outgassing

Product information

Arnite? AV2 340 XL

Polyethylene Terephthalate

Product Description:

20% Glass Reinforced, Low Outgassing

Special Features:

Low outgassing

Used In:

Bezels and AFL Frames

Arnite? (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite? A (PET) and Arnite? T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite? is available including unreinforced, reinforced and flame retardant grades.

Filler / Reinforcement	Glass Fiber, 20% Filler by Weight
Features	Low to No Outgassing
Processing Method	Injection Molding
Resin ID (ISO 1043)	PET-GF20

Physical	Nominal Value	Unit	Test Method
Density	1.52	g/cm3	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	1.1	%
Flow	0.40	%
Water Absorption			ISO 62
Saturation, 73°F	0.50	%
Equilibrium, 73°F, 50% RH	0.25	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1.15E+6	psi	ISO 527-2
Tensile Stress (Break)	21800	psi	ISO 527-2
Tensile Strain (Break)	2.9	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)	3.8	ft·lb/in2	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)	19	ft·lb/in2	ISO 179/1eU

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	473	°F	ISO 75-2/B
264 psi, Unannealed	410	°F	ISO 75-2/A
Melting Temperature 2	491	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	1.7E-5	in/in/°F
Transverse	3.9E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.031 in	HB
0.06 in	HB

Injection	Nominal Value	Unit
Drying Temperature	212 to 248	°F
Drying Time	3.0 to 12	hr
Rear Temperature	536 to 572	°F
Middle Temperature	554 to 590	°F
Front Temperature	554 to 590	°F
Nozzle Temperature	554 to 590	°F
Processing (Melt) Temp	554 to 590	°F
Mold Temperature	266 to 284	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Arnite? AV2 340 XL

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service