校园伸入裙底揉捏1v1h,www.夜色,成免费视频

Akulon? K222-KWGV4

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Nylon 6（PA6）
Product No: Akulon K222-KWGV4
Product Quantity: 25KG / BAG
Product Features: Flame Retardant，Heat Stabilized，Laser Markable，Low (to None) Phosphorus Content

Product information

Akulon? K222-KWGV4

Polyamide 6

Product Description:

20% Glass Reinforced, Heat Stabilized, Flame Retardant (halogen- phosphorous-free), Laser-Markable

Special Features:

Contains release agent

Heat stabilized or stable to heat

Laser markable

Phosphorous free

Akulon? is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon? grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon? sets the market standards.

Filler / Reinforcement	Glass Fiber, 20% Filler by Weight
Additive	Flame Retardant、Heat Stabilizer、Mold Release
Features	Flame Retardant、Heat Stabilized、Laser Markable、Low (to None) Phosphorus Content
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA6-GF20 FR(30)

Physical	Dry	Conditioned	Unit	Test Method
Density	1.36	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	1.0	--	%
Flow	0.60	--	%
Water Absorption				ISO 62
Saturation, 73°F	6.5	--	%
Equilibrium, 73°F, 50% RH	2.0	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	899000	363000	psi	ISO 527-2
Tensile Stress (Break)	11600	6530	psi	ISO 527-2
Tensile Strain (Break)	2.5	15	%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	1.9	1.9	ft·lb/in2
73°F	1.9	4.3	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	19	19	ft·lb/in2
73°F	21	44	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	410	--	°F	ISO 75-2/B
264 psi, Unannealed	365	--	°F	ISO 75-2/A
Melting Temperature 3	428	--	°F	ISO 11357-3
Effective Thermal Diffusivity	1.25E-7	--	m2/s

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+15	1.0E+13	ohms·cm	IEC 60093
Electric Strength	760	640	V/mil	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	4.30	10.0
1 MHz	3.80	3.90
Dissipation Factor				IEC 60250
100 Hz	0.013	0.30
1 MHz	0.021	0.10
Comparative Tracking Index	--	575	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification				IEC 60695-11-10, -20
0.030 in	V-2	--
0.06 in	V-2	--
Glow Wire Flammability Index				IEC 60695-2-12
0.030 in	1760	--	°F
0.12 in	1760	--	°F
Glow Wire Ignition Temperature				IEC 60695-2-13
0.030 in	1290	--	°F
0.12 in	1340	--	°F

Fill Analysis	Dry	Conditioned	Unit
Melt Density	1.03	--	g/cm3
Melt Thermal Conductivity	2.0	--	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.543	--	Btu/lb/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	437 to 455	°F
Middle Temperature	446 to 464	°F
Front Temperature	455 to 482	°F
Nozzle Temperature	455 to 491	°F
Processing (Melt) Temp	473 to 509	°F
Mold Temperature	122 to 176	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

^{<pre id="u2gjy"></pre>}<samp id="u2gjy"><sup id="u2gjy"><form id="u2gjy"></form></sup></samp>

亚洲aaaaaaaaa I 26uuu 在线都市激情 I 506070老熟妇 I 午夜0851网站 I 伊人青青网 I avwwwwwwwww I 欧美黄色A V I AV大片在线 I 日韩手机Aa I 91无套内射 I 美女任你操 I 91在线地址

Products

Products

Akulon? K222-KWGV4

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service