九色蝌蚪自拍,污视频网站免费,国产精品片

<center id="uwem6"></center>

<cite id="uwem6"></cite><li id="uwem6"><code id="uwem6"></code></li>

Ultraform? S 2320 003 UNC Q600

Manufacturer: BASF
Produced At: Europe / China
Product Category: Acetal (POM) Copolymer
Product No: Ultraform S2320 003 UNC Q600
Product Quantity: 25KG / BAG
Product Features: Copolymer、Good Flow、Good Mold Release

Product information

Ultraform? S 2320 003 UNC Q600

Acetal (POM) Copolymer

BASF Corporation

Product Description:

Ultraform S 2320 003 UNC Q600 is an easy flowing and rapidly freezing injection molding POM grade. Contains a mold release agent.

Applications
Typical applications include difficult, thin-walled parts.

Additive	Mold Release
Features	Copolymer Good Flow Good Mold Release
Uses	Thin-walled Parts
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Specific Heat vs. Temperature (ISO 11403-2) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity
--	1.40		ASTM D792
--	1.40	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)	0.671	in3/10min	ISO 1133
Molding Shrinkage
Flow : 0.125 in	0.020	in/in
Across Flow	2.1	%	ISO 294-4
Flow	2.1	%	ISO 294-4
Water Absorption
Saturation	0.80	%	ASTM D570
Saturation, 73°F	0.80	%	ISO 62
Equilibrium, 50% RH	0.20	%	ASTM D570
Equilibrium, 73°F, 50% RH	0.20	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)	392000	psi	ISO 527-2
Tensile Strength
Yield, 73°F	9430	psi	ASTM D638, ISO 527-2
Yield, -40°F	13500	psi	ISO 527-2
Yield, 176°F	4790	psi	ISO 527-2
Tensile Elongation (Yield, 73°F)	9.0	%	ASTM D638, ISO 527-2
Nominal Tensile Strain at Break (73°F)	28	%	ISO 527-2
Tensile Creep Modulus			ISO 899-1
1 hr	276000	psi
1000 hr	189000	psi
Flexural Modulus (73°F)	380000	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179
-22°F	2.4	ft·lb/in2
73°F	2.6	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179
-22°F	81	ft·lb/in2
73°F	86	ft·lb/in2
Notched Izod Impact			ASTM D256
-40°F	0.94	ft·lb/in
73°F	1.1	ft·lb/in

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed	320	°F	ASTM D648
66 psi, Unannealed	313	°F	ISO 75-2/B
264 psi, Unannealed	230	°F	ASTM D648
264 psi, Unannealed	212	°F	ISO 75-2/A
Peak Melting Temperature	333	°F	ASTM D3418, ISO 3146
CLTE - Flow
--	3.3E-5	in/in/°F	ASTM E831
--	6.1E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity
0.0591 in	1.0E+13	ohms	ASTM D257
--	1.0E+13	ohms	IEC 60093
Volume Resistivity
0.0591 in	1.0E+15	ohms·cm	ASTM D257
--	1.0E+15	ohms·cm	IEC 60093
Electric Strength	1000	V/mil	IEC 60243-1
Dielectric Constant			IEC 60250
100 Hz	3.80
1 MHz	3.80
Dissipation Factor			IEC 60250
100 Hz	1.0E-3
1 MHz	5.0E-3
Comparative Tracking Index	600	V	IEC 60112

Injection	Nominal Value	Unit
Drying Temperature	176 to 230	°F
Drying Time	2.0 to 4.0	hr
Suggested Max Moisture	0.15	%
Processing (Melt) Temp	374 to 446	°F
Mold Temperature	140 to 248	°F
Injection Pressure	508 to 1020	psi

<cite id="88m8w"></cite>

亚洲aaaaaaaaa I 26uuu 在线都市激情 I 506070老熟妇 I 午夜0851网站 I 伊人青青网 I avwwwwwwwww I 欧美黄色A V I AV大片在线 I 日韩手机Aa I 91无套内射 I 美女任你操 I 91在线地址

Products

Products

Ultraform? S 2320 003 UNC Q600

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service