中文一区在线,噼里啪啦免费观看,精品免费国产

PELPRENE? P46D-01

Manufacturer: TOYOBO
Produced At: Japan / China
Product Category: TPEE
Product No: PELPRENE P46D-01
Product Quantity: 25KG / BAG
Product Features: Flame Rated/ High Viscosity/Wear Resistan

Product information

PELPRENE? P46D-01

Thermoplastic Polyester Elastomer

TOYOBO America, Inc.

Product Description:

PELPRENE? P46D-01 is a Thermoplastic Polyester Elastomer (TPEE) product.

Characteristics include:

Flame Rated

High Viscosity

Wear Resistant

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.15		ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.50	g/10 min	ASTM D1238
Molding Shrinkage - Flow (0.0787 in)	7.0E-3	in/in	ASTM D955
Water Absorption (Equilibrium, 73°F, 65% RH)	0.45	%	ASTM D570
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	46		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	4630	psi	ASTM D638
Tensile Elongation (Break)	700	%	ASTM D638
Flexural Modulus	16000	psi	ASTM D790
Compressive Modulus	1390	psi	ASTM D695
Taber Abrasion Resistance (1000 Cycles)	10.0	mg	ASTM D1044
Elastomers	Nominal Value	Unit	Test Method
Tear Strength	942	lbf/in	ASTM D624
Compression Set	55	%	ASTM D395
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	No Break		ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	165	°F	ASTM D648
Brittleness Temperature	-85.0	°F	ASTM D746
Vicat Softening Temperature	307	°F	ASTM D1525
Melting Temperature	397	°F	DSC
CLTE - Flow	9.4E-5	in/in/°F	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	4.0E+13	ohms·cm	ASTM D257
Flammability	Nominal Value	Unit	Test Method
Flame Rating	HB		UL 94

Additional Information
Hardness, JIS K6301, A scale: 97 Resilience, JIS K6301: 70 % Dielectric Strength, JIS K2111: 25 MV/m The value listed as Compression Set, ASTM D395 was tested according to the JIS K6301 standard. The value listed as Brittle Point, ASTM D746 was tested according to the JIS K6301 standard. Coefficient of Linear Thermal Expansion, TMA: 17e-5 1/K Compression Modulus, ASTM D695, 10%: 9.6 MPa Tensile Modulus, ASTM D638, 50% Modulus: 15.2 MPa The value listed as Brittle Temp ASTM D746, was tested in accordance with JIS K6301.

^{<tbody id="ggg46"></tbody>}

Products

Products

PELPRENE? P46D-01

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service