福利视频在线,西班牙美女做爰视频,日韩中文字幕一区二区三区四区

CYCOLAC? Resin HMG94MD

Manufacturer: SABIC
Produced At: Import/ China
Product Category: Polycarbonate
Product No: CYCOLAC Resin HMG94MD
Product Quantity: 25KG / BAG
Product Features: Biocompatible，Ethylene Oxide Sterilizable，Good Flow，Radiation Sterilizable

Product information

CYCOLAC? Resin HMG94MD

Acrylonitrile Butadiene Styrene

SABIC Innovative Plastics

Product Description:

Superior flow, injection molding ABS for thin-wall medical applications. Biocompatible (ISO 10993). FDA compliant. Gamma & EtO sterilizable.

Features	Biocompatible,Ethylene Oxide Sterilizable,Good FlowRadiation Sterilizable
Uses	Medical/Healthcare Applications,Thin-walled Parts
Agency Ratings	FDA Unspecified Rating ISO 10993
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity
--	1.04		ASTM D792
--	1.06	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR)
230°C/3.8 kg	12	g/10 min	ASTM D1238
220°C/5.0 kg	13	g/10 min	ISO 1133
Molding Shrinkage - Flow (0.126 in)	5.0E-3 to 8.0E-3	in/in	Internal Method

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
-- 3	360000	psi	ASTM D638
--	355000	psi	ISO 527-2/1
Tensile Strength
Yield 4	6800	psi	ASTM D638
Yield	5800	psi	ISO 527-2/5
Break 4	5210	psi	ASTM D638
Break	5080	psi	ISO 527-2/5
Tensile Elongation
Yield 4	2.0	%	ASTM D638
Yield	2.0	%	ISO 527-2/5
Break 4	18	%	ASTM D638
Break	35	%	ISO 527-2/5
Flexural Modulus
1.97 in Span 5	380000	psi	ASTM D790
-- 6	363000	psi	ISO 178
Flexural Stress
-- 6, 7	10200	psi	ISO 178
Yield, 1.97 in Span 5	11500	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength 8 (73°F)	11	ft·lb/in2	ISO 179/1eA
Notched Izod Impact
-22°F	1.5	ft·lb/in	ASTM D256
73°F	4.5	ft·lb/in	ASTM D256
-22°F 9	3.3	ft·lb/in2	ISO 180/1A
73°F 9	7.6	ft·lb/in2	ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)	186	in·lb	ASTM D3763

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed, 0.126 in	199	°F	ASTM D648
264 psi, Unannealed, 0.126 in	171	°F	ASTM D648
264 psi, Unannealed, 2.52 in Span 10	176	°F	ISO 75-2/Af
Vicat Softening Temperature
--	208	°F	ASTM D1525 11, ISO 306/B50 11
--	212	°F	ISO 306/B120
CLTE			ISO 11359-2
Flow : -40 to 104°F	4.9E-5	in/in/°F
Transverse : -40 to 104°F	4.7E-5	in/in/°F

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (464°F, 1000 sec^-1)	173	Pa·s	ISO 11443

Injection	Nominal Value	Unit
Drying Temperature	180 to 190	°F
Drying Time	2.0 to 4.0	hr
Drying Time, Maximum	8.0	hr
Suggested Max Moisture	0.10	%
Suggested Shot Size	50 to 70	%
Rear Temperature	370 to 390	°F
Middle Temperature	390 to 410	°F
Front Temperature	400 to 440	°F
Nozzle Temperature	400 to 475	°F
Processing (Melt) Temp	400 to 475	°F
Mold Temperature	120 to 160	°F
Back Pressure	50.0 to 100	psi
Screw Speed	30 to 60	rpm
Vent Depth	1.5E-3 to 2.0E-3	in

Products

Products

CYCOLAC? Resin HMG94MD

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service