尤物福利在线观看,日韩最新,黄影院在线观看

<blockquote id="uuwus"></blockquote>

Amodel? A-4160 HSL

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: Amodel PPA
Product No: Amodel A-4160 HSL
Product Quantity: 25KG / BAG
Product Features: Chemical Resistant，Creep Resistant，Fast Molding Cycle，Good Dimensional Stability，Good Toughness，Heat Stabilized，High Heat Resistance，High Strength，Hot Water Moldability，Low CLTE，Lubricated，Ultra High Stiffness

Product information

Amodel? A-4160 HSL

Polyphthalamide

Solvay Specialty Polymers

Product Description:

Amodel? A-4160 HSL resin is a 60% glass reinforced, heat stabilized polyphthalamide (PPA) which exhibits high modulus at elevated temperatures, a high heat deflection temperature and exceptional creep resistance. This material was designed for metal replacement applications. Its rapid crystallization and good flow characteristics allow shorter cycles for enhanced molding productivity.

Black: A-4160 HSL BK324

Filler / Reinforcement	Glass Fiber, 60% Filler by Weight
Additive	Heat Stabilizer，Lubricant，Mold Release
Features	Chemical Resistant，Creep Resistant，Fast Molding Cycle，Good Dimensional Stability，Good ToughnessHeat Stabilized，High Heat Resistance，High Strength，Hot Water Moldability，Low CLTELubricated，Ultra High Stiffness
Uses	Automotive Applications，Automotive Electronics，Automotive Under the Hood，Camera Applications，Cell Phones，Connectors，Electrical/Electronic Applications，Housings，Industrial Applications，Machine/Mechanical Parts，Metal Replacement，Transmission Applications
RoHS Compliance	RoHS Compliant
Appearance	Black
Forms	Pellets
Processing Method	Water-Heated Mold Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)

Physical	Nominal Value	Unit	Test Method
Density	1.75	g/cm3	ISO 1183/A
Molding Shrinkage			ISO 294-4
Across Flow	0.80	%
Flow	0.50	%
Water Absorption (73°F, 24 hr)	0.19	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus			ISO 527-2
73°F	3.38E+6	psi
392°F	1.27E+6	psi
Tensile Stress			ISO 527-2
Break, 73°F	35400	psi
Break, 392°F	11500	psi
Tensile Strain			ISO 527-2
Break, 73°F	1.4	%
Break, 392°F	3.3	%
Flexural Modulus			ISO 178
73°F	2.80E+6	psi
392°F	1.23E+6	psi
Flexural Stress			ISO 178
73°F	55800	psi
392°F	19900	psi
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)	6.0	ft·lb/in2	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)	61	ft·lb/in2	ISO 179/1eU

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)	579	°F	ISO 75-2/A

Injection	Nominal Value	Unit
Drying Temperature	248	°F
Drying Time	4.0	hr
Rear Temperature	605 to 615	°F
Front Temperature	620 to 630	°F
Processing (Melt) Temp	625 to 650	°F
Mold Temperature	150 to 200	°F
Injection Notes
Injection Pressure: 3 to 4 in/sec Storage: Amodel? compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel? resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel? processing guide.

Products

Products

Amodel? A-4160 HSL

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service