综合欧美小说另类图,日韩av电影免费观看高清,三大队在线观看

Delrin? 100P NC010

Manufacturer: Delrin
Produced At: Import/ China
Product Category: POM
Product No: Delrin? 100P NC010
Product Quantity: 25KG / BAG
Product Features: Good Processability，High Viscosity，Homopolymer

Product information

Delrin? 100P NC010

ACETAL RESIN

Product Description:

High Viscosity Acetal Homopolymer with Improved Processing

Additive	Lubricant，Mold Release
Features	Good Processability，High Viscosity，Homopolymer
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Extrusion，Injection Molding，Profile Extrusion，Sheet Extrusion
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Shear Modulus vs. Temperature, Dynamic (ISO 11403-1) Shear Stress vs. Shear Rate (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Tensile Fatigue (W?hler) (ISO 11403-2) Tensile Modulus vs. Temperature (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)	POM
Resin ID (ISO 1043)	POM

Physical	Nominal Value	Unit	Test Method
Density	1.42	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.5	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)	0.128	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.9	%
Flow	2.2	%
Water Absorption			ISO 62
Saturation, 73°F, 0.0787 in	1.4	%
Equilibrium, 73°F, 0.0787 in, 50% RH	0.30	%
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness			ISO 2039-2
M-Scale	88
R-Scale	119
Ball Indentation Hardness (H 358/30)	25100	psi	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	413000	psi	ISO 527-2
Tensile Stress (Yield)	10200	psi	ISO 527-2
Tensile Strain (Yield)	25	%	ISO 527-2
Nominal Tensile Strain at Break	45	%	ISO 527-2
Tensile Creep Modulus			ISO 899-1
1 hr	392000	psi
1000 hr	218000	psi
Flexural Modulus	413000	psi	ISO 178
Flexural Stress (3.5% Strain)	11200	psi	ISO 178
Poisson's Ratio	0.37		ISO 527
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	6.7	ft·lb/in2
73°F	7.1	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	190	ft·lb/in2
73°F	No Break
Notched Izod Impact Strength			ISO 180/1A
-40°F	5.7	ft·lb/in2
73°F	6.7	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	311	°F	ISO 75-2/B
264 psi, Unannealed	203	°F	ISO 75-2/A
264 psi, Annealed	230	°F	ISO 75-2/A
Vicat Softening Temperature
--	347	°F	ISO 306/A50
--	320	°F	ISO 306/B50
Melting Temperature 3	352	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	6.1E-5	in/in/°F
Flow : -40 to 73°F	5.6E-5	in/in/°F
Transverse	6.1E-5	in/in/°F
Transverse : -40 to 73°F	5.6E-5	in/in/°F
Annealing Temperature	320	°F
Annealing Time - Optional	30.0	min/mm

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	2.0E+13	ohms	IEC 62631-3-2
Volume Resistivity	1.0E+14	ohms·cm	IEC 62631-3-1
Electric Strength	1000	V/mil	IEC 60243-1
Relative Permittivity			IEC 62631-2-1
100 Hz	3.90
1 MHz	3.90
Dissipation Factor			IEC 62631-2-1
100 Hz	3.5E-3
1 MHz	5.5E-3
Comparative Tracking Index	600	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Burning Rate 4 (0.0394 in)	2.0	in/min	ISO 3795
Flame Rating
0.031 in	HB		UL 94
0.06 in	HB		UL 94, IEC 60695-11-10, -20
0.03 in	HB		IEC 60695-11-10, -20
FMVSS Flammability	B		FMVSS 302

Fill Analysis	Nominal Value	Unit	Test Method
Melt Density	1.19	g/cm3
Specific Heat Capacity of Melt	0.717	Btu/lb/°F
Thermal Conductivity of Melt	1.5	Btu·in/hr/ft2/°F
Additional Information	Nominal Value	Unit	Test Method
Emission	< 8.00	mg/kg	VDA 275

如需杜邦（DUPONT）原廠物性表及相關文件，請聯系我們工作人員，謝謝！

亚洲aaaaaaaaa I 26uuu 在线都市激情 I 506070老熟妇 I 午夜0851网站 I 伊人青青网 I avwwwwwwwww I 欧美黄色A V I AV大片在线 I 日韩手机Aa I 91无套内射 I 美女任你操 I 91在线地址

Products

Products

Delrin? 100P NC010

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service