av卡一卡二,sao虎桃红精品视频在线播放 ,美女校花脱精光

Delrin? 100TE NC010

Manufacturer: Delrin
Produced At: Import/ China
Product Category: POM
Product No: Delrin? 100TE NC010
Product Quantity: 25KG / BAG
Product Features: High Viscosity，Homopolymer，Low Emissions

Product information

Delrin? 100TE NC010

ACETAL RESIN

Product Description:

Toughened High Viscosity Acetal Homopolymer with Very Low Emissions

Additive	Lubricant，Mold Release
Features	High Viscosity，Homopolymer，Low Emissions
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Extrusion，Injection Molding，Profile Extrusion，Sheet Extrusion
Part Marking Code (ISO 11469)	POM-I
Resin ID (ISO 1043)	POM-I

Physical	Nominal Value	Unit	Test Method
Density	1.37	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR)	2.2	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)	0.122	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.5	%
Flow	1.3	%
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness			ISO 2039-2
M-Scale	65
R-Scale	113

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	268000	psi	ISO 527-2
Tensile Stress (Yield)	7830	psi	ISO 527-2
Tensile Strain (Yield)	25	%	ISO 527-2
Nominal Tensile Strain at Break	> 50	%	ISO 527-2
Flexural Modulus	268000	psi	ISO 178
Flexural Stress (3.5% Strain)	7400	psi	ISO 178
Poisson's Ratio	0.41		ISO 527
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	6.7	ft·lb/in2
73°F	12	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	No Break
73°F	No Break

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	259	°F	ISO 75-2/B
264 psi, Unannealed	160	°F	ISO 75-2/A
Melting Temperature 2	352	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	6.7E-5	in/in/°F
Transverse	6.7E-5	in/in/°F
Annealing Temperature	320	°F
Annealing Time - Optional	30.0	min/mm

Flammability	Nominal Value	Unit	Test Method
Burning Rate 3 (0.0394 in)	1.7	in/min	ISO 3795
FMVSS Flammability	B		FMVSS 302

Fill Analysis	Nominal Value	Unit	Test Method
Melt Density	1.16	g/cm3
Additional Information	Nominal Value	Unit	Test Method
Emission	< 2.00	mg/kg	VDA 275

Injection	Nominal Value	Unit
Drying Temperature	176	°F
Drying Time - Desiccant Dryer	4.0 to 8.0	hr
Suggested Max Moisture	0.050	%
Processing (Melt) Temp	392 to 410	°F
Melt Temperature, Optimum	401	°F
Mold Temperature	104 to 140	°F
Mold Temperature, Optimum	122	°F
Holding Pressure	8700 to 11600	psi
Drying Recommended	yes
Hold Pressure Time	7.50	s/mm
Extrusion	Nominal Value	Unit
Drying Temperature	167 to 185	°F
Drying Time	2.0 to 4.0	hr
Suggested Max Moisture	0.050	%
Melt Temperature	383 to 401	°F
Extrusion Melt Temperature, Optimum	392	°F

亚洲aaaaaaaaa I 26uuu 在线都市激情 I 506070老熟妇 I 午夜0851网站 I 伊人青青网 I avwwwwwwwww I 欧美黄色A V I AV大片在线 I 日韩手机Aa I 91无套内射 I 美女任你操 I 91在线地址

Products

Products

Delrin? 100TE NC010

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service