VICTREX? PEEK POLYMER 90GL60
High performance thermoplastic material, 60% glass fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, standard flow, colour natural/beige.
Applications where higher strength in a static system is required. Low coefficient of thermal expansion. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.
Material Properties |
Physical | Nominal Value | Unit | Test Method |
Density (Crystalline) | 1.83 | g/cm3 | ISO 1183 |
Spiral Flow 1 | 10.0 | cm | Internal Method |
Molding Shrinkage 2 |
|
| ISO 294-4 |
Across Flow | 0.60 | % |
|
Flow | 0.30 | % |
|
Water Absorption (Saturation, 23°C) | 0.40 | % | ISO 62 |
Water Absorption Saturation (100°C) | 0.55 | % | ISO 62 |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus (23°C) | 25000 | MPa | ISO 527-1 |
Tensile Stress |
|
| ISO 527-2 |
Break, 23°C | 227 | MPa |
|
Break, 125°C | 150 | MPa |
|
Break, 175°C | 90.0 | MPa |
|
Break, 275°C | 50.0 | MPa |
|
Tensile Strain (Break, 23°C) | 1.2 | % | ISO 527-2 |
Flexural Modulus (23°C) | 23100 | MPa | ISO 178 |
Flexural Stress (23°C) | 360 | MPa | ISO 178 |
Compressive Stress |
|
| ISO 604 |
23°C | 230 | MPa |
|
120°C | 140 | MPa |
|
200°C | 65.0 | MPa |
|
Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact Strength (23°C) | 10.5 | kJ/m2 | ISO 180/A |
Unnotched Izod Impact Strength (23°C) | 50.0 | kJ/m2 | ISO 180 |
Hardness | Nominal Value | Unit | Test Method |
Shore Hardness (Shore D, 23°C) | 87.0 |
| ISO 868 |
Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (1.8 MPa, Unannealed) | 343 | °C | ISO 75-2/Af |
Glass Transition Temperature (Onset) | 143 | °C | ISO 11357-2 |
Melting Temperature | 343 | °C | ISO 11357-3 |
CLTE - Flow |
|
| ISO 11359-2 |
< 143°C | 13 | ppm/K |
|
> 143°C | 15 | ppm/K |
|
CLTE - Average |
|
| ISO 11359-2 |
< 143°C | 30 | ppm/K |
|
> 143°C | 70 | ppm/K |
|
Thermal Conductivity |
|
| ISO 22007-4 |
23°C 3 | 0.45 | W/m/K |
|
23°C 4 | 0.55 | W/m/K |
|
Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity (23°C) | 1.0E+16 | ohms·cm | IEC 60093 |
Dielectric Strength (2.00 mm) | 22.0 | kV/mm | IEC 60243-1 |
Dielectric Constant (23°C, 1 kHz) | 3.80 |
| IEC 60250 |
Dissipation Factor (23°C, 1 MHz) | 4.0E-3 |
| IEC 60250 |
Comparative Tracking Index | 150 | V | IEC 60112 |
Flammability | Nominal Value | Unit | Test Method |
Glow Wire Flammability Index (2.0 mm) | 960 | °C | IEC 60695-2-12 |
Fill Analysis | Nominal Value | Unit | Test Method |
Melt Viscosity (400°C) | 525 | Pa·s | ISO 11443 |
如需 威格斯（VICTREX）原廠物性表及相關(guān)文件，請(qǐng)聯(lián)系我司工作人員，謝謝！
