CYCOLOY? FR Resin C2800
聚碳酸酯+丙烯腈丁二烯苯乙烯
產品說明:
CYCOLOY C2800 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is a standard grade that can be injection molded. This non-chlorinated, non-brominated flame retardant PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY C2800 resin is an excellent candidate for a wide variety of applications including business equipment, monitors, and enclosures.
添加劑 | |
特性 | - Chlorine Free、抗撞擊性，良好、良好的流動性、無溴、阻燃性
|
用途 | - Lighting Applications，電氣/電子應用領域，電器用具，電子顯示器，家用貨品，建筑應用領域，汽車內部零件，藥物，醫療/護理用品
|
加工方法 | |
多點數據 | Coefficient of Thermal Expansion vs. Temperature (ASTM E831) Elastic Modulus vs Temperature (ASTM D4065) Flexural DMA (ASTM D4065) Instrumented Impact (Energy) (ASTM D3763) Instrumented Impact (Load) (ASTM D3763) Pressure-Volume-Temperature (PVT - Zoller Method) Specific Heat vs. Temperature (ASTM D3417) Tensile Creep (ASTM D2990) Tensile Fatigue Tensile Stress vs. Strain (ASTM D638) Thermal Conductivity vs. Temperature (ASTM E1530) Viscosity vs. Shear Rate (ASTM D3835)
|
Also Available In | |
密度 / 比重 |
|
| ASTM D792 |
-- | 1.17 |
|
|
-- 3 | 1.18 |
|
|
熔流率（熔體流動速率） (260°C/2.16 kg) | 16 | g/10 min | ASTM D1238 |
收縮率 |
|
| 內部方法 |
流動 : 0.126 in | 4.0E-3 到 6.0E-3 | in/in |
|
橫向流動 : 0.126 in | 4.0E-3 到 6.0E-3 | in/in |
|
吸水率 |
|
| ASTM D570 |
24 hr | 0.10 | % |
|
平衡, 73°F | 0.40 | % |
|
洛氏硬度 (R 級) | 120 |
| ASTM D785 |
拉伸模量 4 | 389000 | psi | ASTM D638 |
抗張強度 5 (屈服) | 8410 | psi | ASTM D638 |
伸長率 5 |
|
| ASTM D638 |
屈服 | 5.0 | % |
|
斷裂 | 50 | % |
|
彎曲模量 6 (3.94 in 跨距) | 389000 | psi | ASTM D790 |
彎曲強度 6 (屈服, 3.94 in 跨距) | 13900 | psi | ASTM D790 |
懸壁梁缺口沖擊強度 (73°F) | 8.0 | ft·lb/in | ASTM D256 |
裝有測量儀表的落鏢沖擊 (73°F, Total Energy) | 513 | in·lb | ASTM D3763 |
載荷下熱變形溫度 |
|
| ASTM D648 |
264 psi, 未退火, 0.126 in | 163 | °F |
|
264 psi, 未退火, 0.252 in | 176 | °F |
|
維卡軟化溫度 | 194 | °F | ASTM D1525 7 |
線形熱膨脹系數 |
|
| ASTM E831 |
流動 : -40 到 140°F | 4.0E-5 | in/in/°F |
|
橫向 : -40 到 140°F | 4.0E-5 | in/in/°F |
|
導熱系數 | 1.4 | Btu·in/hr/ft2/°F | ASTM C177 |
RTI Elec | 176 | °F | UL 746 |
RTI Imp | 158 | °F | UL 746 |
RTI | 176 | °F | UL 746 |
表面電阻率 | > 1.0E+14 | ohms | ASTM D257 |
體積電阻率 | 1.0E+17 | ohms·cm | ASTM D257 |
介電強度 (0.126 in, in Oil) | 450 | V/mil | ASTM D149 |
介電常數 |
|
| ASTM D150 |
60 Hz | 3.00 |
|
|
100 Hz | 3.00 |
|
|
50 kHz | 3.00 |
|
|
耗散因數 |
|
| ASTM D150 |
50 Hz | 4.8E-3 |
|
|
60 Hz | 4.8E-3 |
|
|
耐電弧性 8 | PLC 6 |
| ASTM D495 |
相比耐漏電起痕指數(CTI) | PLC 1 |
| UL 746 |
高電弧燃燒指數(HAI) 9 | PLC 0 |
| UL 746 |
高電壓電弧起痕速率 (HVTR) | PLC 3 |
| UL 746 |
熱絲引燃 (HWI) | PLC 3 |
| UL 746 |
UL 阻燃等級 |
|
| UL 94 |
0.03 in | V-2 |
|
|
0.06 in | V-0 |
|
|
0.09 in | 5VB |
|
|
極限氧指數 | 35 | % | ASTM D2863 |
干燥溫度 | 167 到 176 | °F |
|
干燥時間 | 3.0 到 4.0 | hr |
|
建議的最大水分含量 | 0.040 | % |
|
建議注射量 | 30 到 80 | % |
|
料筒后部溫度 | 410 到 491 | °F |
|
料筒中部溫度 | 419 到 500 | °F |
|
料筒前部溫度 | 437 到 527 | °F |
|
射嘴溫度 | 446 到 527 | °F |
|
加工（熔體）溫度 | 446 到 527 | °F |
|
模具溫度 | 122 到 158 | °F |
|
背壓 | 43.5 到 102 | psi |
|
螺桿轉速 | 40 到 70 | rpm |
|
排氣孔深度 | 1.5E-3 到 3.0E-3 | in |
|
Injection Molding Parameters |
如需沙伯基礎（SABIC）原廠物性表及相關文件，請聯系我們工作人員，謝謝！
